Fronius Primo 3.0-1 Service Manual

140
Replacing other components
Replacing other
components
If the following components are faulty, the entire inverter must be replaced:
- Housing parts (excluding covers)
- Inductors
- Heat sinks
- Seals (not including the seals on the covers)
The covers (DATCOM cover and power stage set cover) can be replaced as a module with
an injection-moulded seal.
WARNING! An electric shock can be fatal.
Observe the safety rules (see the beginning of the "Safety" section)

Fronius Primo 3.0-1 Specifications

General

Purpose	Solar panel
Efficiency	98 %
Output power	3000 W
Input current	12 A
Input voltage	80 - 1000 V
Output voltage	- V
Input frequency	50 - 60 Hz
Power supply type	Auto
Adjustable output voltage	-
International Protection (IP) code	IP65
Product color	Black, Grey
Built-in display	Yes
Operating temperature (T-T)	-40 - 55 °C

Weight and Dimensions

Depth	204 mm
Width	431 mm
Height	645 mm
Weight	21500 g