Fronius Primo 3.0-1 Service Manual

153
EN
Documentation
Documentation - The electrician who performed the tests is responsible for compiling the proper docu-
mentation
- Document all completed tests in a test record. Enter both the measured values and
the equipment/calibration data used
- If an individual test cannot be performed, the resulting decision must be justified and
documented by the examiner
- Any device that fails a test must be clearly marked as unsafe and the operator in-
formed. The device may no longer be used.
The test record for the "Safety inspection" is available on the Fronius Partnerweb.

Fronius Primo 3.0-1 Specifications

General

Purpose	Solar panel
Efficiency	98 %
Output power	3000 W
Input current	12 A
Input voltage	80 - 1000 V
Output voltage	- V
Input frequency	50 - 60 Hz
Power supply type	Auto
Adjustable output voltage	-
International Protection (IP) code	IP65
Product color	Black, Grey
Built-in display	Yes
Operating temperature (T-T)	-40 - 55 °C

Weight and Dimensions

Depth	204 mm
Width	431 mm
Height	645 mm
Weight	21500 g