131
EN
Replacing the RECERBO display PC board
Replacing the RE-
CERBO display
PC board
Removing the RECERBO:
Take the inverter out of the wall bra-
cket, open it and remove the Datama-
nager card (see "Opening and closing
the device" and "Replacing the Data-
manager card" sections)
Remove the external fan cable from
the cable guide (1)
Push the RECERBO holder locking de-
vices (2) upwards
Remove the RECERBO module
Take the holder (3) off the RECERBO
Break the device data unit (4) off the
faulty RECERBO
Installing the RECERBO:
(1)
(2) (2)
WARNING! An electric shock can
be fatal. Observe the safety rules
(see the beginning of the "Safety"
section).
1
2
3
4
(4) (3)
NOTE! Take care not to damage
any of the components when car-
rying out the next two steps.
5
6
To Next Page
Loading...
