Fronius Primo 3.0-1 Service Manual

83
EN
Foreword and safety instructions
Safety
Fronius Technical
Support
Please contact your national Fronius Technical Support team with any fault analysis que-
ries.
Ordering spare
parts
Please contact your national Fronius Technical Support team to order spare parts or to
consult on fault analysis queries.
General The service manual can be obtained from the DownloadCenter at "downloadcenter.froni-
us.com".
Each chapter in the service manual deals with one complete topic. Use each chapter as a
self-contained source of information. A short description of each chapter follows.
Tools and meas-
uring devices
This provides an overview and description of all equipment required for servicing the de-
vice professionally. This equipment includes:
- Tools required
- Measuring and testing equipment
- Ancillary materials
Functional de-
scription
Contains a brief descriptive overview of the entire system.
WARNING! Work that is carried out incorrectly can cause serious injury and dam-
age. All activities described in the service manual must only be carried out by Fro-
nius-trained service technicians. Take note of the "Safety rules" section in the
inverter operating instructions.
WARNING! An electric shock can be fatal. Before opening the device:
- Move the mains switch to the O position
- Unplug the device from the mains
- Put up an easy-to-understand warning sign to stop anybody inadvertently
switching it back on again
- Using a suitable measuring instrument, check to make sure that electrically
charged components (e.g. capacitors) have been discharged.
WARNING! An electric shock can be fatal. If the device needs to be switched on
briefly for testing while the housing is open:
- Do not touch any parts inside the housing
- Only touch using suitable measuring or test probes
WARNING! An inadequate ground conductor connection can cause serious inju-
ry or damage. The housing screws provide a suitable ground conductor connec-
tion for earthing (grounding) the housing and must NOT be replaced by any other
screws which do not provide a reliable ground conductor connection.

Fronius Primo 3.0-1 Specifications

General

Purpose	Solar panel
Efficiency	98 %
Output power	3000 W
Input current	12 A
Input voltage	80 - 1000 V
Output voltage	- V
Input frequency	50 - 60 Hz
Power supply type	Auto
Adjustable output voltage	-
International Protection (IP) code	IP65
Product color	Black, Grey
Built-in display	Yes
Operating temperature (T-T)	-40 - 55 °C

Weight and Dimensions

Depth	204 mm
Width	431 mm
Height	645 mm
Weight	21500 g