Fronius Primo 3.0-1 Service Manual

85
EN
Tools and measuring devices
General "Tools and measuring devices" offers an overview and description of all equipment needed
to service the device professionally. This equipment includes:
- Tools required
- Measuring and testing equipment
- Ancillary materials
Tools required - Torx screwdriver, TX20
- Torx screwdriver, TX25
- Slotted screwdriver, 3 mm
- Plug key
- Socket wrench insert, 7 mm
- Socket wrench insert, 36 mm
- Socket wrench insert, 41 mm
- Flat spanner, 7 mm
- Flat spanner, 36 mm
- Flat spanner, 41 mm
- Diagonal cutting pliers
- Needle-nosed pliers
- Torque screwdriver with bit insert, 1 - 6 Nm
- Torque ratchet, 1 - 10 Nm
Measuring and
testing equip-
ment
- Digital multimeter
- Safety inspection equipment
Auxiliary materi-
als
- Cleaning materials (spray, paper)
- Cable ties 102 (42,0407,0099)
- Heat conductive foil, TPC (42,0300,3054)
- 5x25 PT screw with seal ring (42,0401,4231)
- Thermally conductive pad (42,0300,3138)

Fronius Primo 3.0-1 Specifications

General

Purpose	Solar panel
Efficiency	98 %
Output power	3000 W
Input current	12 A
Input voltage	80 - 1000 V
Output voltage	- V
Input frequency	50 - 60 Hz
Power supply type	Auto
Adjustable output voltage	-
International Protection (IP) code	IP65
Product color	Black, Grey
Built-in display	Yes
Operating temperature (T-T)	-40 - 55 °C

Weight and Dimensions

Depth	204 mm
Width	431 mm
Height	645 mm
Weight	21500 g