Contents
General 34
Principle 34
Application options 34
Device concept 34
Versions 35
Control elements and connections 36
Controls and connections, versions 1 and 4 36
Controls and connections, versions 2 and 3 37
Before commissioning 38
Safety 38
Preparing the TPS 5000 auto-transformer mains cable 39
Specified mains cable for autotransformer, „versions 3 and 4“ 39
Preparing the auto-transformer mains cable and strain relief device 39
Preparing the TPS 2700/3200 auto-transformer mains cable 40
Specified mains cable for autotransformer, versions 1 and 2 40
Preparing the auto-transformer mains cable and strain relief device 40
Fitting the mains cable to the auto-transformer 41
Securing the mains cable in the strain relief device, versions 1 and 2 41
Fitting the mains cable and strain relief device, versions 3 and 4 41
Connecting the auto-transformer mains cable 41
Final check 42
Fitting the auto-transformer 44
Safety 44
General 44
Overview 45
Dismantling the wirefeeder mount and gas cylinder holder 45
Fitting the extension plate 46
Dismantle the power source and the cooling unit 46
Fitting the autotransformer on the trolley 46
Fit the autotransformer, power source and the cooling unit 47
Fitting the wirefeeder mount and gas cylinder holder 47
Putting the auto-transformer into service 49
Safety 49
Putting the unit into service 49
Care, maintenance and disposal 50
Safety 50
General 50
At every start-up 50
Every 6 months 51
Disposal 51
Troubleshooting 52
Safety 52
Troubleshooting 53
Technical data 55
Safety 55
TPS 2700 600/575-460 V autotransformer 55
TPS 3200 600/575-460 V autotransformer 56
TPS/MW 5000 600/575-460 V auto-transformer 57
TPS/MW 5000 - 480-455 V autotransformer 58
Circuit diagrams 59
33
EN
To Next Page
Loading...
