NOTE!
Air inlets and outlets must never be covered, not even partially.
Every 6 months
CAUTION!
Danger due to the effect of compressed air.
This can result in damage to property.
▶
Do not bring the air nozzle too close to electronic components.
1
Dismantle device side panels and clean inside of device with dry, reduced
compressed air
2
If a lot of dust has accumulated, clean the cooling air ducts
WARNING!
Risk of electric shock from improperly connected ground cables and equipment
grounds.
An electric shock can be fatal!
▶
When reassembling the side panels, make sure that grounding cables and
equipment grounds are properly connected.
Disposal Waste electrical and electronic equipment must be collected separately and re-
cycled in an environmentally-friendly way, in accordance with the European Di-
rective and national legislation. Used equipment must be returned to the distri-
butor or disposed of via an approved local collection and disposal facility. Cor-
rect disposal of used equipment promotes the sustainable recycling of material
resources. Failing to dispose of used equipment correctly can lead to adverse he-
alth and/or environmental impacts.
Packaging materials
Separate collection according to material. Check your local authority regulations.
Crush containers to reduce size.
51
EN
To Next Page
Loading...
Need help?
General
