Fronius TPS 4000 - Page 64

64
63 EIF | 7.x Ethernet communication error, x stands for
1...Licence not activated in power source
Contact After-Sales Service
63 EIF | 8.x CFM error, x stands for
1 - 4...Internal error
Contact After-Sales Service
63 EIF | 9.1 Phase error (only in conjunction with the software
configuration group interface), check the phases
63 EIF | 10.1 ProfiNet connection is interrupted (only in conjunction with
Daimler Integra software configuration)
63 EIF | 11.1 Double selection process, (only in conjunction with the
software configuration group interface)
Error
no.
Front display Error description
Remedy