Fronius TPS/i Robotics TWIN Push - WF 30 I R TWIN; Device Concept; Intended Use

27
EN-US
WF 30i R /TWIN
Device concept
The wirefeeder WF 30i R /TWIN has been
specially designed for automated applicati-
ons in connection with a MIG/MAG TWIN
welding process.
The standard 4-roller drive offers excellent
wire feeding properties.
Intended Use The device is intended exclusively for wirefeeding in automated MIG/MAG welding in com-
bination with Fronius system components. Any other use does not constitute proper use.
The manufacturer accepts no liability for any damage resulting from improper use.
Proper use also means:
- Reading these Operating Instructions in their entirety
- Following all instructions and safety rules in these Operating Instructions
- Carrying out all the specified inspection and servicing work