Fronius TPS/i Robotics TWIN Push User Manual

44
TWIN Welding Processes
TWIN welding
processes - over-
view
* activation required
IMPORTANT! There are no TWIN characteristics available for Pulse or Standard welding
processes.
Welding process combinations using Pulse or Standard are not recommended!
Symbols The following symbols are used in the descriptions of the welding process combination op-
tions below:
Lead wire electrode
(= lead power source)
Trail wire electrode
(= trail power source)
Welding direction
PMC TWIN PMC TWIN
PCS TWIN PCS TWIN
Single wire
(Pulse*/Standard*/PMC*/LSC*)
-
- Single wire
(Pulse*/Standard*/PMC*/LSC*)
Trail wire electrode
Lead wire electrode
Active PMC arc with droplet transfer
Inactive PMC arc (no droplet transfer)
Active PCS arc
I
L
Welding current of the lead power source
I
T
Welding current of the trail power source
Welding direction

Fronius TPS/i Robotics TWIN Push Specifications

General

Brand	Fronius
Model	TPS/i Robotics TWIN Push
Category	Welding System
Language	English