Fronius TPS/i Robotics TWIN Push - Pcs Twin Pcs Twin

46
PCS TWIN / PCS
TWIN
Welding current time curves and schematic representation of the material transition
PCS TWIN characteristics are predominantly used in order to weld with a modified spray
arc at the lead wire electrode and a pulsed arc at the trail wire electrode.
Advantages:
- high penetration by the standard arc of the lead wire electrode
- large seam cross sections possible
- large difference in the wire feeding speeds possible
- visually pleasing weld seams due to the pulsed arc of the trail wire electrode
NOTE!
In the TWIN process PCS TWIN/PCS TWIN, only weld the lead wire electrode in the
spray arc.
t (s)
I (A)
I
L
I
T