Fronius TPS/i Robotics TWIN Push User Manual

74
3 4
* After insertion, ensure that the inner liner is right at the front in the hosepack.
IMPORTANT! The screws for securing the inner liners must not be loosened!
5
2x
6
2x
*** Screw the clamping nipple onto the inner liner up to the stop. The inner liner needs
to be visible through the hole in the fastener.
7
2x
3
1
1
2x
4
1
2
2
5
***
6
7

Fronius TPS/i Robotics TWIN Push Specifications

General

Brand	Fronius
Model	TPS/i Robotics TWIN Push
Category	Welding System
Language	English