EasyManua.ls Logo

Fuji Xerox ApeosPort-III C3300

Fuji Xerox ApeosPort-III C3300
579 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connectivity & Network Setup
163
Tools
5
Manually Configured IPv6 Address
This setting is configurable when [IPv6 Address Manual Configuration] is set to [Enable].
Specify an IPv6 address.
Note Enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a
hexadecimal value.
Specify an address using alphanumeric characters (0 to 9, and A to F) and colons (:). If you
mistyped a character on the screen, select [Backspace] to delete the character.
Manually Configured IPv6 Address Prefix
This setting is configurable when [Manually Configured IPv6 Address] is set. Specify a prefix
in the range of 0 to 128.
Manually Configured IPv6 Gateway
This setting is configurable when [Manually Configured IPv6 Address] is set. Specify a
gateway address.
Note Enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where "xxxx" is a
hexadecimal value.
Automatically Configured IPv6 Address
Displays the following addresses automatically assigned.
z
Link-local address
z
Auto stateless address 1 and prefix
z
Auto stateless address 2 and prefix
z
Auto stateless address 3 and prefix
z
Auto gateway address
IPv6 - IP Filter
Select whether or not to filter IP addresses.
Note To set the IP addresses that the machine accepts connection from, use CentreWare Internet
Services. For details, refer to "CentreWare Internet Services Settings" (P.249).
Machine’s E-mail Address/Host Name
Set the e-mail address and host name for the machine. In [Machine’s E-mail Address/
Host Name], you can set the following items.
E-mail Address
Enter the E-mail address for the machine with the numeric keypad displayed by pressing
[Change Settings]. Up to 128 single-byte characters are allowed.
When receiving E-mail via SMTP
You can set any name for the account (on the left side of @). Set the address section (on the
right side of @), with the combination of the host name and domain name. An alias cannot be
set.
Example: mymail@myhost.example.com
z
Account name: mymail
z
Host name: myhost
z
Domain Name: example.com

Table of Contents

Related product manuals