Layout Adjustment
89
Copy
3
Invert Image (Making Reversed Copies of Images)
This feature allows you to invert document images to make mirror and negative images.
Note • When Output Color is set to [Black] or [Single Color], the black color on the document is
inverted to white, and the white color to black.
• When Output Color is set to [Color], the colors are inverted to their complementary colors.
• When [Negative Image] and [Edge Erase] are set simultaneously, the edge erase area turns
to white.
1
Select [Invert Image].
2
Select any item.
îš„Mirror Image
Creates a mirror image of the document.
îš„Negative Image
Creates a negative image of the document.
Original Orientation (Specifying the Orientation of Loaded Documents)
This feature allows you to specify the orientation of a document to have the machine
identify the top of the document.
Note • If the [Original Orientation] differs from the actual document orientation, then the machine
may mistakenly detect the top of the document.
1
Select [Original Orientation].
2
Select [Upright Images] or [Sideway Images]
in accordance with the orientation of the
document loaded.
îš„Upright Images
Select this item when placing the top edge of
the document against the top side of the
document glass or document feeder.
îš„Sideways Images
Select this item when placing the top edge of the document against the left side of the
document glass or document feeder.
To Next Page
Loading...
Need help?
General
