10 Media Print (Text and Photos)
280
Media Print (Text and Photos)
10
Inserting and Ejecting Media
This section describes how to insert and eject media.
Inserting Media
1
Insert a CompactFlash card into the
CompactFlash slot of the Memory Card
Reader, with the side with the insertion mark,
such as , facing up.
The <CompactFlash Eject> button pops up
when a CompactFlash card is inserted
correctly.
To print, refer to "Selecting Files" (P.281),
and "Setting the Printing Options" (P.283)".
After printing, refer to "Ejecting Media"
(P.280), and eject the media.
Ejecting Media
Before ejec
ting medi
a, mak
e sure tha
t the <Acces
s> indica
tor of the
Memory Ca
rd
Reader is not lit.
Important • When the <Access> indicator of the Memory Card Reader is lit, do not press the
<CompactFlash Eject> button, disconnect the USB cable, or switch the machine off. The
data in the media may become damaged.
1
Press the <CompactFlash Eject> button (1),
and then remove the CompactFlash card (2).
To Next Page
Loading...
Need help?
General
