Fuji Xerox ApeosPort-III C3300

Machine Information
81
Machine Status
4
Machine Information
On the [Machine Information] screen, you can check the machine configuration and
paper tray status. You can change settings for the print mode. You can also print
various reports/lists to check the job history, settings and registered information.
The following shows the reference section for each item.
General Information ................................................................................................................... 81
Paper Tray Status ....................................................................................................................... 83
Print Reports............................................................................................................................... 83
Automatically Printed Reports/Lists .......................................................................................... 91
Overwrite Hard Disk .................................................................................................................. 93
Print Mode.................................................................................................................................. 93
Fax Receiving Mode .................................................................................................................. 96
1 Press the <Machine Status> button.
2 On the [Machine Information] screen
displayed, you can check the machine
status.
General Information
On the [General Information] screen, you can check the serial number of the machine,
machine configuration, and software version.
1 Check the machine information in a screen displayed.
Web Site
Indicates how to make maintenance and operating enquiries.
Machine Serial Number
Indicates the serial number of the machine.
Current System Software
Indicates the current system software.
IP Address
Indicates the IP address of the machine.
Machine Configuration
Displays the [Machine Configuration] screen.
For more information, refer to "[Machine Configuration] Screen" (P.82).
Software Version
Displays the [Software Version] screen.
For more information, refer to "[Software Version] Screen" (P.82).