Paper Jams
469
Problem Solving
14
4
Remove the jammed paper.
5
Return Lever 2a to its original position.
6
Close the front cover of the finisher.
Note • If the front cover is not completely closed, a message will appear and the machine will not
operate.
Paper Jams at 2a in the Finisher (Using Wheel 2c)
1
If the edge of the jammed paper comes out
from the exit to the output tray, gently pull
out the paper to remove.
2
Open the front cover of the finisher.
3
Move Lever 2a to the right.
To Next Page
Loading...
