3 Copy
86
Copy
3
îš„Margin Shift
Allows you to adjust margins. Set the amounts of the top & bottom, and left & right
margins within the range from 0 to 50 mm in 1 mm increments.
z
Side 1
Displays the [Image Shift - Side 1] screen.
Refer to "[Image Shift - Side 1] Screen" (P.86).
z
Side 2
Displays the [Image Shift - Side 2] screen.
Refer to "[Image shift - Side 2] Screen" (P.87).
z
Mirror Side 1
Select this item when you want the positioning of Side 2 to match the positioning of
Side 1.
îš„Original Orientation
Allows you to specify the orientation of the document to have the machine identify the
top of the document.
Note • If the [Original Orientation] differs from the actual document orientation, then the machine
may mistakenly detect the top of the document.
z
Upright Images
Select this item when placing the top edge of the document against the top side of
the document glass or document feeder.
z
Sideways Images
Select this item when placing the top edge of the document against the left side of
the document glass or document feeder.
[Image Shift - Side 1] Screen
You can make settings for Side 1.
1
Select any item.
îš„No Shift
Does not shift the position of document images.
îš„Auto Center
Shifts document images so that they are placed in the center of paper.
To make fine adjustments, set the amounts of the top and bottom, and left and right
margins within the range from 0 to 50 mm in 1 mm increments.
To Next Page
Loading...
Need help?
General
