Fax
4
4 Fax
190
When Not Using a Receiver
1
Adjust the volume of the line monitor.
We recommend setting the volume of the line monitor to [Loud] so that it is easy to
hear the voice prompts.
For information on how to change the volume of the line monitor, refer to "5 Tools" > "Common
Service Settings" > "Audio Tones" > "Line Monitor Volume" in the Administrator Guide.
2
Select [On-hook (Manual Send/Receive)] on
the [More Options] screen.
3
Select [Manual Receive] from the drop-down
menu.
4
Specify the fax number of the facsimile
information service.
z
The call destination can be specified using
the numeric keypad address numbers, or
one touch buttons. The address book cannot be used.
z
The call destination can also be specified using the keyboard displayed on the
screen.
Note • When the line type is set to a pulse line, [Tone (:)] does not appear. If you want to send tones
(or to use the touch-tone services) while using a pulse line, select [Tone (:)]
• Some touch-tone services may not be available even if you set your telephone to send
tones.
5
When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
6
When input is finished, press the <Start> button.
To Next Page
Loading...
Need help?
General
