Fuji Xerox ApeosPort-III C3300

Setup
217
Tools
5
Important • It is not possible to use wildcard or group dial number specifications.
Speed Dial
Specify an address with an address number. Enter the address number with the numeric
keypad, and select [Save]. The specified address appears in [Name/E-mail Address] on the
[Send as Internet Fax] screen.
New Recipient
Specify a new address. Select the item you want to change, and select [Change Settings].
The specified address appears in [Name/E-mail Address] on the [Send as Internet Fax]
screen.
Detailed Settings
[Detailed Settings] screen appears. Set the following options.
z
Message
Enter a comment by using the keyboard displayed.
z
Internet Fax Profile
Select an Internet Fax profile.
A profile controls the image resolution, paper size, and other attributes when data is sent or
received by Internet Fax-compatible machines.
z
Resend Attempts
Set whether to try again if a transmission fails. If you select [On], also set [Resend Attempts]
and [Resend Interval (Seconds)].
Delete Recipient
Deletes all information for the selected addresses.
Change Settings
Confirm or change the selected recipients.
For information about the method for confirm/change, refer to "Add Address Book Entry" (P.220).
Resend Attempts
Set whether to try again if a transmission fails. If you select [On], also set [Resend Attempts]
and [Resend Interval (Seconds)].
z
Resend Attempts
Set the transmission retry count in the range of 1 to 5.
z
Resend Interval (Seconds)
Set the transmission retry interval in the range of 30 to 300 seconds.
Send as E-mail (ApeosPort Series Models Only)
Specify the recipients for e-mail transmission.
You can specify a total of 100 addresses, either by selecting from the address book or by
direct input.
If [On] has been selected for [Encryption], you cannot specify a recipient by selecting [New
Recipient].
Address Book
The recipients can be specified from address book. The specified address appears in
[Recipient(s)] in the [E-mail] screen.
New Recipient
Specify a new address. Select the item you want to change, and select [Change Settings] to
set. The specified address appears in [Recipient(s)] in the [E-mail] screen.
Subject
Enter a subject using the keyboard displayed.
Delete
Deletes all information for the selected recipient.