EasyManua.ls Logo

Fuji Xerox ApeosPort-III C3300

Fuji Xerox ApeosPort-III C3300
579 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Code
409
Problem Solving
14
016-589
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the data could not be read
from the FTP server after connection.
[Remedy] Check the access privilege to the FTP server.
016-593
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because an internal error occurred
after connection to the FTP server.
[Remedy] Try again. If the error persists, contact our Customer
Support Center.
016-594
016-595
016-596
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because a network error occurred.
[Remedy] Try again. If the error persists, contact our Customer
Support Center.
016-598
016-599
O [Cause] The size of an e-mail page exceeds the maximum
message size due to page splitting.
[Remedy] Proceed with one of the following methods:
z
Reduce the file size for [Quality/File Size].
z
Increase the value for [Maximum Split Count].
For details about [Quality/File Size], refer to "5 Scan" > "E-mail Options/
Filing Options" > "Quality/File Size (Specifying an Image Compression
Ratio When Scanning)" in the User Guide.
For details about "Maximum Split Count", refer to "Maximum Split Count"
(P.199)
016-700
O [Cause] The job was suspended because the number of the digits
for the Secure Print or Charge Print passcode set on the
print driver was less than the value specified in [Min.
Passcode Length for Stored Job] on the machine.
[Remedy] On the print driver, set the passcode string equal to or
longer than the value specified in [Min. Passcode Length
for Stored Job].
016-702
O [Cause] Unable to process print data due to insufficient print page
buffer.
[Remedy] Take one of the following actions:
z
Set [Imga Quality] to [Standard].
z
Increase the print page buffer size.
z
Add on memory.
For information about the Print Mode and the Page Print Mode, refer to the
print driver's online help. For information about memory, refer to "Allocate
Memory" (P.175).
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.

Table of Contents

Related product manuals