Specifications
501
Appendix
15
Finisher-C1 (Optional)
Finisher-C1 with Booklet Maker (Optional)
Type Output tray × 1: Collated/Uncollated
Finisher tray × 1:Collated (offset stacking available)/
Uncollated (offset stacking available)
Paper Size/Paper
Weight
Output tray Maximum: SRA3, 12x19",
Minimum: B5, 55-220 g/m
2
Finisher tray Maximum: SRA3, 12x19",
Minimum: B5, 55-220 g/m
2
Stacker Capacity Output tray 500 sheets (A4)
Finisher tray (For paper not stapled)
A4: 3,000 sheets
B4 or larger: 1,500 sheets
Mixed stack*: 300 sheets
Finisher tray (For paper stapled)
A4: 200 sets or 3,000 sheets
B4 or larger: 100 sets or 1,500 sheets
* Based on when larger size paper is stacked on paper.
Important • When using 80 g/m
2
paper
Staple Capacity : 50 sheets (90 g/m
2
or less)
Paper Size : Maximum: A3, 11×17", Minimum: B5
Position : 1 place (front/back, angled stapling),
2 places (parallel stapling)
Important • When using 80 g/m
2
paper
Punch Paper size : A3, 11×17", B4, A4, A4 , 8.5x11", 8.5x11" ,
B5
Number of Holes: 2
Paper Weight : 55-220 g/m
2
Important • When using 80 g/m
2
paper
Dimensions/Weight Width 876 × Depth 660 × Height 1,058mm, 60 kg
Space Requirement Width 1,863 x Depth 679 mm (Main unit + Finisher-C1, when the
extension tray is extended, when Bypass Tray is fully extended)
Type Output tray × 1: Collated/Uncollated
Finisher tray × 1:Collated (offset stacking available)/
Uncollated (offset stacking available)
Booklet tray × 1:Collated/Uncollated
Paper Size/Paper
Weight
Output tray Maximum: SRA3, 12x19",
Minimum: B5,
55-220 g/m
2
Finisher tray Maximum: SRA3, 12x19",
Minimum: B5,
55-220 g/m
2
Booklet tray Maximum: A3, 11x17",
Minimum: A4, 8.5x 11",
64-90 g/m
2
To Next Page
Loading...
