Fuji Xerox D110

Output Format
105
Copy
3
Start & End Page Numbers
Allows you to specify the start and end pages to add page numbers, in the range from
1 to 9999.
Note • Use [+] and [-], or the numeric keypad to enter the start and end page numbers.
Include Covers/Separators
This option is available when you select [All Pages]. Select this check box to include
covers and separators.
Starting Number
Allows you to specify a starting page number to add page numbers, in the range from
1 to 9999.
Note • Use [+] and [-], or the numeric keypad to enter a starting page number.
[Bates Stamp] Screen
This screen allows you to add prefix text and page numbers onto copies.
1 Select any option.
Off
Does not add prefix text and page numbers onto copies.
On
Adds prefix text and page numbers onto copies.
Prefix
Allows you to enter prefix text with up to 16 characters, using the displayed keyboard.
Number of Digits
Displays the [Bates Stamp - Number of Digits] screen.
You can select [Auto Assign] or [Manual Assign]. When you select [Manual Assign],
you can specify the number of digits to be used for page numbers in the range from 1
to 9 in 1 digit increments.
Apply To
Displays the [Apply Bates Stamp To] screen.
Refer to "[Apply Bates Stamp To] Screen" (P.106).
Position
Displays the [Bates Stamp - Position] screen.
You can select a prefix and page-number position from six options.
For side 2 of copy sheets, you can select [Same as Side 1] or [Mirror Side 1].
Font Size
Displays the [Bates Stamp - Font Size] screen.
You can select a prefix and page-number size from three options, or can directly
specify a size in the range from 6 to 24 points in 1 point increments.