Making Backups of Files in a Folder
263
Send from Folder
5
Setting the System Administrator ID and Passcode on the Machine for the
Back-Up Tool for Restored Document
The Back-Up Tool for restored document requires the system administrator ID and
passcode when communicating with the machine. By default, the application is
configured with factory default system administrator ID and passcode.
If the system administrator ID and passcode used on the machine are changed from
their default settings, also change the ID and passcode on the Back-Up Tool for
restored document accordingly.
Note • The default system administrator ID is "11111". The default passcode is "x-admin".
• If you changed the system administrator’s ID and passcode, obtain the attribute values
again.
1 Select a machine for which
password is to be set, and select
[Device Communication Settings]
from the [Edit] menu.
2 Enter the system administrator ID
in [System Administrator ID].
3 Enter the password in [Passcode/
Password] and [Confirm Passcode/
Password].
4 Click [OK].
To Next Page
Loading...
Need help?
General
