3 Copy
66
Copy
3
Copy
You can select [Copy] or [Simple Copy] on the [Services Home] screen to set the
features for the Copy service.
This section describes the features you can select on the [Copy] screen. The following
shows the reference section for each feature.
Reduce/Enlarge (Making Enlarged/Reduced Copies) ................................................................66
Paper Supply (Selecting the Paper for Copying) ........................................................................70
2 Sided Copying (Making 2 Sided Copies) ................................................................................72
Original Type (Selecting the Document Type)...........................................................................72
Copy Output (Specifying Finishing Options) .............................................................................72
Pages per Side (Copying Multiple Pages onto One Sheet).........................................................72
Lighten/Darken (Adjusting the Copy Density)...........................................................................72
You can customize the layout of the features displayed on the [Copy] screen. For more information,
refer to "5 Tools" > "Copy Service Settings" > "Copy Tab - Features Allocation" in the Administrator
Guide.
1 Select [Copy] on the [Services Home]
screen.
2 Select a feature on the [Copy] screen.
Reduce/Enlarge (Making Enlarged/Reduced Copies)
This feature allows you to select a copy ratio to enlarge or reduce the size of copies.
1 Specify a copy ratio. You can use the
numeric keypad to specify a value, or [+] and
[-] to specify reduction/enlargement ratios
directly.
100%
Copies at the same image size as the original document.
To Next Page
Loading...
