Fuji Xerox D110

Output Format
117
Copy
3
2 Select any option.
Off
Does not insert separators.
Blank Transparency Separators
Inserts a separator each time a transparency is copied. Only one set of copies can be
made.
Blank Separators & Handouts
Inserts a separator each time a transparency is copied. At the same time, the required
number of copies is made for handouts.
Transparency Set & Handouts
Makes copies on transparencies. At the same time, the required number of copies is
made for handouts.
Transparency Tray
Allows you to select the paper tray to be used for the transparencies.
Select [More] to display the [Paper Supply - Transparency] screen on which you can
select a tray.
Note • For [Transparency Tray], select one of the paper trays. Auto Paper Select feature is not
available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator
Tray], [Separator & Handout], or [Handout Tray] at the same time.
Separator Tray
Allows you to select the paper tray to be used for the separators.
Select [More] to display the [Paper Supply - Separator] screen on which you can
select a tray.
Note • For [Separator Tray], select one of the paper trays. Auto Paper Select feature is not
available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator
Tray] at the same time.
Separator & Handout
Allows you to select the paper tray to be used for the separators and handouts.
Select [More] to display the [Paper Supply - Separator & Handout] screen on which
you can select a tray.
Note • For [Separator & Handout], select one of the paper trays. Auto Paper Select feature is not
available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Separator
& Handout] at the same time.