3 Copy
120
Copy
3
z
Real Time Sample Job
This option is displayed if you select [Stacker - Stacker Cart] for the output
destination, and you can output samples of specified portions. You can specify up to
three portions for each of the sets you want to confirm during sorting and the pages
you want to confirm during stacking. Samples are output to the output tray at the top
of stacker trays (optional).
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• To print a sample while printing a job, press the sample button on the High Capacity Stacker.
Paper Size and Stapling Position
* The staple orientation displayed on the touch screen differs from the actual staple orientation. Outputs are stapled in
the orientation shown in the above table.
1 Staple
1 Top
Right
2 Staples 2 Top 2 Right
A4
B5 , 8 x 10" ,
8.5 x 11"
,
16K
A3
A4, B4,
8.5 x 11",
8.5 x 13"
,
8.5 x 14",
11 x 17", 8K
1 Left
Center
1 Top
Center
1 Right
Center
A4 , B5 , 8 x 10" , 8.5 x 10" , 8.5 x 11" ,
16K
A4, A3, B4, 8.5 x 11", 8.5 x 13", 8.5 x 14",
11 x 17", 8K
* *
*
*
To Next Page
Loading...
Need help?
General
