Setup Menu
339
System Settings
11
îš„Address Number
Specify an address with an address number. Enter the address number with the numeric
keypad, and select [Save]. The specified address appears in [Recipient Name/E-mail
Address] on the [Send as iFax] screen.
îš„New Recipient
Specify a new address. Select the item you want to change, and select [Change Settings].
The specified address appears in [Recipient Name/E-mail Address] on the [Send as iFax]
screen.
îš„Detailed Settings
z
iFax Comment (Mail Contents)
Enter a comment by using the keyboard displayed.
z
iFax Profile
Select an iFax profile.
A profile controls the image resolution, paper size, and other attributes when data is sent or
received iFax-compatible machines.
z
Encryption
Set whether to enable or disable the encryption feature.
Note •
To enable encryption, select [On] before specifying an address. [On] will be disabled after an
address is specified.
z
Digital Signature
Select whether to enable or disable the digital signature feature.
z
Resend Attempts
Set whether to try again if a transmission fails. If you select [On], also set [Resend Attempts]
and [Resend Interval (Seconds)].
- Resend Attempts
Set the transmission retry count in the range of 1 to 5.
- Resend Interval (Seconds)
Set the transmission retry interval in the range of 30 to 300 seconds.
îš„Delete Recipient
Deletes all information for the selected addresses.
îš„Change Settings
Confirm or change the selected recipients.
For information about the method for confirm/change, refer to Address Book (P.343).
Send as E-mail
Specify the recipients for e-mail transmission.
You can specify a total of up to 100 addresses, either selecting from the address book
or by direct input.
Note • If [On] has been selected for [Encryption], you cannot specify a recipient by selecting [New
Recipient].
• If selecting [On] for [Encryption] in the [Detailed Settings] screen, enable this item before
specifying the recipients. You cannot select [On] for [Encryption] after specifying the
recipients.
îš„Address Book
The recipients can be specified from address book. The specified address appears in
[Recipient Name/E-mail Address] in the [Send as E-mail] screen.
îš„New Recipient
Specify a new address. Select the item you want to change, and select [Change Settings] to
set. The specified address appears in [Recipient Name/E-mail Address] in the [Send as E-
mail] screen.
To Next Page
Loading...
Need help?
General
