Error Code
473
Problem Solving
16
016-711
OORefer to 016-985.
016-712
O Refer to 003-751.
016-713
O [Cause] The input passcode does not agree with the passcode set
to the mailbox.
[Remedy] Input the correct passcode.
016-714
O [Cause] The specified mailbox does not exist.
{Remedy] Create a new mailbox or specify an existing mailbox.
016-716
O [Cause] Unable to spool TIFF file due to insufficient hard disk
space.
[Remedy] Remove unnecessary documents and users from the
machine, and then attach the hard disk. For information on
attaching the hard disk, contact our Customer Support
Center.
Refer to "Printing/Deleting Documents in the Mailbox" (P.208).
016-717
O [Cause] Unable to create a "transmission report (undelivered)" or
"transmission report" because transmission result
information required for creating the report is not stored in
the machine's memory.
[Remedy] Take one of the following actions:
z
Execute the jobs for large size iFax documents (about
2GB) by splitting each document to minimize memory or
HDD usage.
z
If the large number of scan or iFax documents are being
processed, wait to execute a new job until the jobs are
completed.
z
After the job that you want to check in a report is
completed, do not execute 200 or more jobs to have the
job recorded on a report.
016-718
O [Cause] Unable to process the PCL print data due to insufficient
memory.
[Remedy] Reduce the resolution, or cancel 2-sided printing or N up,
and then print again.
016-719
O [Cause] Unable to process the PCL print data due to insufficient
print page buffer.
[Remedy] Increase the size of the print page buffer.
016-720
O [Cause] An invalid command is included in PCL print data.
[Remedy] Check the print data and try to print again.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
To Next Page
Loading...
Need help?
General
