Error Code
475
Problem Solving
16
016-732
O [Cause] The form specified by the emulation has not been
registered at the host side.
[Remedy] Resend the form data.
016-733
O O [Cause] 1. Unable to obtain the IP address (the string after "@" in
the destination e-mail address) when sending e-mail.
2. Unable to resolve the Internet address (the string after
"@") by the DNS server when sending e-mail.
[Remedy] For Cause 1: Check the e-mail address.
For Cause 2: Check the DNS server address.
016-735
O O [Cause] Attempted to print [Job Template List] while updating the
job template.
[Remedy] Retry printing after waiting for a while.
016-746
O [Cause] An unsupported feature is included in the received PDF.
[Remedy] Print using a print driver.
016-747
O [Cause] The memory became insufficient when using both the
[Repeat Image] and [Annotation] features simultaneously.
[Remedy] Take one of the following actions:
z
Use the bigger annotation image size.
z
Use less [Repeat Image].
z
Increase memory.
016-748
O O O O [Cause] Unable to print due to insufficient hard disk space.
[Remedy] Reduce the number of print pages by dividing up the print
data or printing one copy at a time when making multiple
copies.
016-749
O [Cause] For a print job:
1. The print language received from the print driver is
unsupported by this machine.
2. A PDF file was to be printed on the PDF-unsupported
model using ContentsBridge.
For printing of a document received by iFax :
3. The print language received from the print driver is
unsupported by this machine.
[Remedy] For Cause 1: Use the machine’s print driver for printing. If
the problem persists, contact our Customer Support
Center.
Note • An optional package is necessary for some print
languages such as PostScript. For more
information, contact our Customer Support Center.
For Cause 2: Do not use ContentsBridge to print a PDF
file.
For Cause 3: Request the sender to send iFax using a
print language supported by this machine.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
To Next Page
Loading...
Need help?
General
