Output Format
87
Copy
3
Important • When you set this feature, the machine will not print jobs if the total number of scanned
pages exceeds the limit. If this occurs, cancel the jobs by following the instruction appearing
on the screen. The maximum number of scannable pages is 999 per job. When two or more
jobs are in the queue and A4 LEF (the size recommended by Fuji Xerox) is used, the
maximum number of scannable pages is 6000 for all the jobs. These values are approximate
and may vary depending on the original’s paper type, size, and orientation.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
1 Select [Watermark].
2 Select any item.
îš„Control Number
Displays the [Watermark - Control Number] screen.
Refer to "[Watermark - Control Number] Screen" (P.87).
îš„Text
Displays the [Watermark - Text] screen.
Refer to "[Watermark - Text] Screen" (P.88).
îš„User Account Number
Displays the [Watermark - User Account Number] screen.
Refer to "[Watermark - User Account Number] Screen" (P.88).
îš„Date & Time
Displays the [Watermark - Date & Time] screen.
Refer to "[Watermark - Date & Time] Screen" (P.88).
îš„Serial Number
Displays the [Watermark - Serial Number] screen.
Refer to "[Watermark - Serial Number] Screen" (P.89).
[Watermark - Control Number] Screen
You can set a control number within the range from 1 to 999.
1 Select [On].
2 Set the start number using [ ] and
[ ] or with the numeric keypad.
îš„Off
No control number is printed.
îš„On
A control number is printed. Enter the starting number of the control number.
To Next Page
Loading...
Need help?
General
