Fuji Xerox DocuCentre-IV C2260

15 Appendix
516
Appendix
15
Finisher-B1 (Optional)
*1 Based on when larger size paper is stacked on paper.
*2 For the center binding/folding feature, Booklet Maker Unit for Finisher-B1 is required. After a job
with center binding/folding specified was output, remove the output paper from the tray to output the
next job. In addition, when you print a job with center binding/folding specified and smaller-sized
paper remains on the output tray, remove the paper from the tray first.
*3 For the Punching feature, US 2/3 Hole Punch Kit for Finisher-B1 or 2/4 Hole Punch Kit for Finisher-
B1 is required.
Type Finisher tray : Sorting (Offset available)/
Stacking (Offset available)
Paper Size/Paper
Weight
Finisher tray Maximum: A3, 11 × 17"
Minimum: B5
60 - 220 gsm
Note • Paper smaller than B5 is delivered to the center tray.
Stacker Capacity Finisher tray (For paper not stapled)
A4: 2,000 sheets
B4 or larger: 1,000 sheets
Mixed stack*
1
: 300 sheets
(For paper stapled)
A4: 100 sets or 1,000 sheets
B4 or larger: 75 sets or 750 sheets
Center binding/folding
*2
: 50 sets or 600 sheets
Folding
*2
: 500 sheets
Important • When using 80 gsm paper
Staple Capacity: A4: 50 sheets (90 gsm or less)
Paper size: Maximum: A3, 11 × 17", Minimum: B5
Position: 1 place (front: angled stapling, back: straight
stapling), 2 places (parallel stapling)
Important • When using 80 gsm paper
Punch
*3
Paper size: A3, 11 × 17", B4, A4, A4 , 8.5 × 11",
8.5 × 11" , B5
Number of Holes: 2/4 holes, or US 2/3 holes
Paper Weight: 60 - 200 gsm
Important • When using 80 gsm paper
Booklet Finishing
*2
Capacity: Center binding: 15 sheets, Folding: 5 sheets
Paper Size: Maximum: A3, 11 × 17", Minimum: A4, 8.5 × 11"
Paper Weight: Center binding: 64 - 80 gsm, Folding: 64 - 105 gsm
Important • When using 80 gsm paper
Dimensions/Weight Width 657 × Depth 552 × Height 1,017 mm*, 28 kg
Width 657 × Depth 597 × Height 1,087 mm*, 37 kg (When the
Booklet Maker Unit is attached)
*: The values do not include the finisher transport area located within
the main unit.
Space Requirement
(when connected to the
main unit)
Width 1,576 × Depth 640 mm (Main unit + Finisher-B1, when the
extension tray and the bypass tray are fully extended)
Width 1,576 × Depth 651 mm (Main unit + Finisher-B1 + Booklet
Maker, when the extension tray and the bypass tray are fully
extended)