3 Maintenance
88
Maintenance
3
• For Paper Supply, select the paper tray on which A4 , A3 , 8.5 x 11" , or 11 x 17"
white paper is loaded.
• For Target, select from [Copy & Print Jobs], [Copy Jobs Only], [Print Jobs Only], and [None].
7 Select [Start].
Note • The message "Outputting the Calibration
Chart... - Copy Job" appears and the
document for calibration (Calibration
Chart) is printed.
8 Align the magenta patch of the printed
Calibration Chart against the left side of the
document glass, and load the chart face
down on the document glass.
Note • Place the Calibration Chart on the
document glass.
9 Place at least five sheets of white paper on
the Calibration Chart to cover the Chart and
close the document cover.
10 Select [Start].
The message “Calibration in progress. - Copy Job” appears and the machine
automatically calibrates the colors. It takes about 10 seconds to complete calibration.
A screen showing the result appears.
11 Select [Confirm].
12 To continue calibration for other screen types, repeat steps 6 to 10.
13 Select [Close] repeatedly until the [Tools] screen is displayed.
14 Select [Close].
15 Copy to confirm the image quality.
16 Select [Close].
To Next Page
Loading...
Need help?
General
