3.12 Printing Using E-mail - Mail Print - 105
Connectivity >
Protocols >
TCP/IP
Host Name Specify the printer’s host
name. Host name is used
by dynamic update of DNS
and SMB. If host name
having more than 16
single-byte characters is
set, the first 15 characters
are regarded as host
name.
Alphanumeric
characters plus
hyphen (-); up
to 32 bytes
{{
Domain Name Specify the DNS domain
name.
Alphanumeric
characters plus
period (.) and
hyphen (-); up
to 255 bytes
{ -
Obtain DNS
Server Address
Automatically/
Obtain IPv6
DNS Server
Address
Automatically
Select the [Enabled] check
box to obtain the IPv4 DNS
server address/IPv6 server
address automatically.
IPv4:
• Cleared:
Manual
• Selected:
DHCP*
IPv6:
• Cleared:
Manual
• Selected:
DHCPv6-lite
{ -
Preferred DNS
Server/
Alternate DNS
Server 1 - 2
Specify the IPv4/IPv6 DNS
server address.
IPv4:
xxx.xxx.xxx.xxx
IPv6: IPv6-addr
format
{ -
Dynamic DNS
Registration
(IPv4/IPv6)
Select the [Enabled] check
box to update the IPv4/
IPv6 DNS automatically,
and the [Overwrite] check
box to overwrite.
• Enabled
• Overwrite*
{ -
Generate
Domain Search
List
Automatically
Select the [Enabled] check
box to generate the
domain search list
automatically.
• Selected:
Auto
generation
enabled*
• Cleared:
Auto
generation
disabled
{ -
Domain Name
1 - 3
Specify domain names. Alphanumeric
characters plus
period (.) and
hyphen (-); up
to 255 bytes
{ -
Connection
Time-Out
Specify the time-out time
for domain searches.
1 - 60 seconds
1 second*
{ -
DNS
Resolution via
IPv6 First
Select the [Enabled] check
box to give priority to IPv6
DNS resolution in the dual
stack mode.
• Selected:
Priority*
• Cleared:
Non-priority
{ -
Item Setting Description Available
Settings
Receiving
Protocol
SMTP POP3
To Next Page
Loading...
