2.2 Switching On/Off the Power 59
Switching the Main Power Off
Important
• Do not switch the main power off while there is a display on the screen or the <Energy Saver> button
blinks. Switching off the main power may damage the hard disk and the memory or cause a machine
malfunction.
• Switch the main power off first when unplugging the power cord. Unplugging the power cord with the
main power on may damage the hard disk and the memory or cause a machine malfunction.
1. Make sure that the power is switched off.
2. Open the front cover.
3. Press the < > side of the printer’s main
power switch to turn off the main power.
Note
• The <Main Power> lamp goes out on the control
panel.
4. Close the front cover.
To Next Page
Loading...
