410 A Appendix
A.6 Installing the HDD Extension Kit
The HDD Extension Kit (optional) must be installed in any of the following instances.
• To enable the following features
Sample Set*
1
, Secure Print*
1
, Mail Print, Private Charge Print*
1
, Charge Print*
1
, Delayed
Print*
1
, Font Downloading, Feature Enhance Kit, IEEE802.1x authentication, IPsec
certificate, ThinPrint, Finisher (optional), and IC Card Reader (optional)*
2
.
*
1
The function can be used by enabling a RAM Disk when no
HDD Extension Kit (optional)
is installed.
*
2
The IC Card Reader may not be supplied with the printer in some regions. Contact your
dealer for details.
• To enhance the following installed features
Number of forms that can be registered, electronic sort feature performance, spool
capacity, and number of log entries.
This section describes how to install the HDD Extension Kit (optional) on the printer.
Installation procedure
1. Press the < > side of the printer's power
switch to turn off the power.
Note
• Make sure that there is no indication on the display,
and <Energy Saver> button is off.
2. Open the front cover.
HDD Extension Kit (hard disk)
To Next Page
Loading...
