Fuji Xerox DocuPrint C5005 d User Manual

A.2 Options 401
A.2 Options
The following table lists the main accessories available for the printer. To purchase them,
contact the dealer where you purchased the printer.
• Product names and codes are current as of November 2010.
• Product names and codes are subject to change.
• For the latest information about optional accessories, contact our Customer Support Center or your dealer.
Product Name
Product
Code
Description
HDD Extension Kit EC101541 For functions that require
HDD Extension Kit (optional) , refer
to “A.6 Installing the HDD Extension Kit” (P. 410).
Extension System Memory 512MB EC101475 Increases the printer's memory capacity.
For information about the features and situations that
require additional memory, refer to “A.5 Installing Extension
System Memory” (P. 405).
Extension System Memory 1GB EC101476
3 Tray Module EC101798 Three paper trays for loading up to 500 sheets of plain
paper (When using 80 gsm paper). Installs directly under
the printer unit.
1 Tray Module EC101785 A tray that can load 500 sheets of paper (When using 80
gsm paper).
Tandem Tray Module EC101799 Consists of three trays. Tray 3 can load 860 sheets of paper
and Tray 4 can load 1,125 sheets of paper (when using 80
gsm paper).
HCF B1 QC100065 A tray that can load 2,030 sheets of paper (When using 80
gsm paper).
Side Tray EC101477 Delivers output face up.
Finisher-B1 EC101542 Staples output sheets.
Booklet Maker Unit for Finisher-B1 QC100044 Staples output sheets. Also folds output sheets in half or
staples them.
The HDD Extension Kit (optional) is required.
US 2/3 Hole Punch Kit for Finisher-B1 QC100046 2/3 hole-punches output sheets.
2/4 Hole Punch Kit for Finisher-B1 QC100047 2/4 hole-punches output sheets.
Cover Support Chain for Finisher B1 EC101784 The stopper to be installed to the top cover for Finisher-B1.
Finisher-C1 with Booklet Maker EC101544 Staples or hole-punches output sheets. Also folds output
sheets in half or staples them.
The HDD Extension Kit (optional) is required.
US 2/3 Hole Punch Kit for Finisher-C1 EC101183 2/3 hole-punches output sheets.
Parallel Port Kit EC101516 Required to use the parallel interface.
Gigabit Ethernet Board Kit EC101517 Allows you to connect 1000 BASE-T Ethernet.
TC/SC Additional Fonts Kit EC101548 Supports Chinese fonts.
Feature Enhance Kit EL300701 Required to use the following features.
• Image log
•Watermark
• Network accounting feature
The
HDD Extension Kit (optional) is required to use the
Feature Enhance Kit (optional).
Embedded IC Card Reader EC101623 Built-in IC card reader. Using the IC card enables
authentication or accounting.
HDD Extension Kit (optional) is
required to install this device.

Fuji Xerox DocuPrint C5005 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint C5005 d
Category	Printer
Language	English