5.2 Common Menus Setting 171
[Auto Clear]
[Low Power Mode]
Note
• Refer to “2.4 Setting/Exiting the Energy Saver Modes” (P. 62) for more information on Low Power Mode.
Login Attempts Sets the number of authentication errors until access is denied within 1 to 10
tries.
• [5 Time(s)] (default)
Note
• When [Max.LoginAttempts] is set to [Unlimited], [Unlimited] is displayed.
System Settings
Auto Clear
Setting Description
Auto Clear Sets whether or not to automatically clear the menu display within 1 to 30
minutes in 1-minute increments. (See *2 on P. 214.)
• [Off] (default)
• [1 Minutes Later] to [30 Minutes Later]
System Settings
Low Power Mode
Setting Description
Low Power Mode This feature automatically lowers the temperature of the fusing unit to save
electricity when the preset time has elapsed. Set whether or not to enable this
feature.
• [Enabled] (default)
•[Disabled]
Note
• When [Sleep Mode] is set to [Disabled], [Low Power Mode] cannot be set to
[Disabled].
Setting Description
To Next Page
Loading...
Need help?
General
