186 5 Control Panel Settings
[Extra Center Tray]
[Software Options]
Note
• This item appears only when the Feature Enhance Kit (optional) is installed.
• To install the Feature Enhance Kit and HDD Extension Kit (optional) are necessary.
System Settings
Extra Center Tray
Setting Description
Extra Center Tray Sets whether or not to use Extra Center Tray.
• [Installed] (default)
• [Not Installed]
System Settings
Software Options
Software Options
FeatureEnhance Kit
FeatureEnhance Kit
Enable Kit
Setting Description
FeatureEnhance
Kit
Enables the Feature Enhance Kit installed on the printer. The confirmation
message is displayed when [Enable Kit] is selected. Press the <OK> button.
Note
• Once the [FeatureEnhance Kit] is enabled, the ROM of the installed Feature
Enhance Kit cannot be used by other devices.
• To reset or disable this feature, contact our Customer Support Center or your
dealer.
To Next Page
Loading...
Need help?
General
