3.12 Printing Using E-mail - Mail Print - 107
Connectivity >
Protocols >
SMTP Server
SMTP Server
IP Address /
Host Name
Specify the IP address of
the POP3 server for
receiving e-mail, the IPv6-
addr format, or FQDN (Fully
Qualified Domain Name).
Also specify the port
number used by the SMTP
server.
•IPv4
Input data in the form of
xxx.xxx.xxx.xxx. xxx
indicates numeric values
between 0 and 255.
•IPv6
Input data in the form of
xxxx:xxxx:xxxx:xxxx:xxx
x:xxxx:xxxx:xxxx. xxxx
indicates values in
hexadecimal.
• When inputting the
wrong data, re-enter it by
pressing <Clear> button.
Alphanumeric
characters plus
period (.) and
hyphen (-); up
to 128 bytes
{ -
Port Number
for sending E-
mail
Specify the port number
used by the SMTP server
for sending e-mail.
1 ~ 65535
{{
Port Number
for receiving E-
mail
Specify the port number
used by the SMTP server
for receiving e-mail.
1 ~ 65535
{ -
SMTP-SSL/
TLS
Communication
Specify the SSL/TLS
communication for SMTP.
• Disabled*
• STARTTLS
(If Available)
• STARTTLS
•SSL/TLS
{{
Machine’s E-
mail Address
Specify the printer’s e-mail
address.
Any name can be specified
for the account (Left side of
@ mark) in case of SMTP
reception. Specify
combined values of the
host name and domain
name for the address
(Right side of @ mark).
Alias cannot be specified.
• Account Name: mymail
• Host Name: myhost
• Domain Name:
example.com
E-mail address for the
above example is
mymail@myhost.example.
com.
Characters
allowed for e-
mail
addresses; up
to 128 bytes
{ -
Item Setting Description Available
Settings
Receiving
Protocol
SMTP POP3
To Next Page
Loading...
Need help?
General
