112 4 Paper
îš„ Paper for 2-Sided Printing
The following sizes and types of paper can be used for 2-sided printing.
Note
• If you want to print on both sides of a type of paper that is not supported for duplex printing, print the
front side and then reload the paper manually and print the reverse side (this is only possible if the front
side was printed with this machine). In this case, set the paper type in the print driver to [xxx S2] (xxx:
paper type). Note that you cannot print on the reverse side when using Lightweight, Labels, or
Transparency paper.
• Depending on paper quality, paper fiber orientation, and other factors, proper printing may not be
possible with some types of paper. The use of standard paper is recommended.
Supported Paper Specifications
If using general paper (commercially available paper), make sure that it meets the following
specifications. To achieve the best print quality, however, we recommend you to use
standard paper instead.
Paper Size Paper Type
A3 B4 , A4 , A4 , B5 , B5 , A5 ,
A5 , B6 , 8.5 x 11" , 8.5 x 11" , 8.5 x 13" ,
8.5 x 14" , 11 x 15" , 11 x 17" , A4-Cover ,
Letter-Cover , 12 x 18" , SRA3 ,
Custom Paper (Width: 128 - 320 mm,
Length: 140 - 483 mm)
Plain (60 - 105 gsm),
Recycled (60 - 105 gsm),
Bond (60 - 105 gsm),
Heavyweight (106 - 169 gsm),
Extra Heavyweight (170 - 256 gsm)*
1
,
Gloss (106 - 169 gsm),
HeavyweightGloss (170 - 256 gsm)*
1
*1
: 2-Sided printing can be performed automatically with the paper weighing up to 220gsm.
Paper Tray Specifications (G.S.M.)
Bypass tray
55 - 280 gsm
Tray 1 (Standard)
60 - 256 gsm
Tray 2 (1 Tray module)
(Optional)
60 - 256 gsm
Tray 2 - 4 (3 Tray module)
(Optional)
60 - 256 gsm
Tray 3, 4 (Tandem tray
module) (Optional)
60 - 256 gsm
Tray 6 (HCF B1) (Optional)
55 - 216 gsm
To Next Page
Loading...
Need help?
General
