4.2 Loading Paper 123
Bypass Tray Feed Orientations for Labels
Be sure the orientation of labels when loading labels in the bypass tray.
Important
• For best print quality, do not use envelopes that:
• are curled or twisted.
• are stuck together or damaged.
• have windows, holes, perforations, cutouts, or embossments.
• use tie strings, metal clamps, or metal folding bars.
• have postage stamps attached.
• have any exposed adhesive when the flaps are closed.
• have deckle edges or creased corners.
• are wrinkled, rough or are glued.
• have adhesive when flaps are open.
• In cases where you must print on envelopes with adhesive flaps, close the flaps and load the envelopes
so they feed from the flap side. Loading envelopes with adhesive flaps open can cause a malfunction.
Load the labels with the label side (print side) facing down, in
landscape orientation.
Note
When printing labels, load them in landscape orientation.
• Placing labels in portrait direction may cause printer’s
malfunction or paper jams.
Paper feed
direction
To Next Page
Loading...
