To Next Page

To Previous Page

200 5 Control Panel Settings

[CtrTrayUp-Offset]

Note

• This option appears when Extra Center Tray is installed and [Extra Center Tray] is set to [Installed].

[Finisher Offset]

Note

• This option appears only when the Finisher (optional) is installed.

Printer Settings

CtrTrayUp-Offset

Setting Description

CtrTrayUp-Offset

Offsetting means that each set of copies is delivered to the center tray and

shifted slightly to separate it from the previous job. This sets the offset

function for the center tray.

• Offset per Set (Default)

Offset stacking per set

•Offset per Job

Offset stacking per job (print job)

•Off

No offset stacking

Printer Settings

Finisher Offset

Setting Description

Finisher Offset

Offsetting means that each set of copies is delivered to the right middle

tray and shifted slightly to separate it from the previous job. This sets the

offset function for the right middle tray.