312 7 Maintenance
5. Close the finisher transport cover F, and
then close the top transport door G of the
finisher.
Note
• If the finisher transport cover F or top transport door G
is not completely closed, a message will appear and
the machine remain paused.
Disposal procedure (for Finisher-C1 with Booklet Maker)
1. Make sure that the machine is not
operating, and open the front door.
2. Pull out the hole punch waste container R4.
3. Empty the container.
4. Insert the emptied hole punch waste
container into the finisher until it stops.
To Next Page
Loading...
