7.10 Configuring Encryption Settings 357
Encryption of printer-to-LDAP-server HTTP communication (SSL/
TLS client)
SSL/TLS protocol is used for encryption of HTTP communication between LDAP server and
the printer.
Normally it is not necessary to configure certificate settings. However, if LDAP server is
configured to request authentication of an SSL client, you will need to use CentreWare
Internet Services to import the printer's existing SSL/TLS client certificate and configure its
settings.
Also, to perform certificate validation and validate LDAP server, you need to validate LDAP
server's SSL/TLS server certificate by registering its root certificate on the printer from
CentreWare Internet Services.
Note
• Refer to the online help for CentreWare Internet Services for information about how to use it to import a
certificate issued by another CA.
Encryption Using IPSec
IPSec can be used to encrypt communications with the printer.
An IKE authentication pre-shared key or digital signature can be selected with the printer.
A printer IPSec certificate is required in order to select a digital signature.
Use CentreWare Internet Services to import a certificate issued by another CA. In order to
encrypt by using digital signature, a root certificate for IPSec server to accept is required.
Self-signed certificate or a certificate issued by another CA cannot be used.
Note
• Refer to the online help for CentreWare Internet Services for information about how to use it to import a
certificate.
To Next Page
Loading...
