106 Printer Connection and Software Installation
• For Windows 8, Windows 8 64-bit Edition, and Windows Server 2012
1 On the Desktop screen, place the mouse pointer in the upper right corner of the screen and
move the mouse down, and then select Settings.
2 Click Control Panel → Hardware and Sound (Hardware for Windows Server 2012) → Devices
and Printers.
3 Click Add a printer to launch the Add Printer wizard.
4 If the printer is listed, select the printer and click Next.
If the printer is not listed, click The printer that I want isn't listed.
a Click Select a shared printer by name.
b Enter the path to the printer in the text box, and then click Next.
The server host name is the name that identifies the server computer on the network. The shared
printer name is the name assigned during the server installation process.
If this is a new printer, you may be prompted to install a print driver. If no print drivers are
available, you will need to provide a path to your print driver.
5 Confirm the printer name, and then click Next.
6 Perform the following as required, and then click Finish.
• Click Set as the default printer to set this printer as the default printer.
• Click Print a test page to print a test page for verifying installation.
If a test page is printed successfully, installation is complete.
For example:\\<server host name>\<shared printer name>
To Next Page
Loading...
Need help?
General
