Using the Operator Panel Menus and Keypad 301
• Wireless Setup (DocuPrint CM215 fw Only)
Purpose:
To configure the wireless network interface.
Values:
Select
Access
Select the access point from the list. The access points are listed starting with the one in
the best communication condition.
WEP Key Entry When you select an access point using WEP as the security method,
enter the WEP key. For 64bit keys, enter 10 hexadecimal characters.
For 128bit keys, enter 26 hexadecimal characters.
PassPhrase
Entry
When you select an access point using WPA, WPA2, or Mixed as the
encryption type, enter the passphrase of 8 to 63 alphanumeric
characters.
To Next Page
Loading...
Need help?
General
