Using the Operator Panel Menus and Keypad 303
• WPS (DocuPrint CM215 fw Only)
Purpose:
To configure wireless networks in accordance with the WPS standards.
Values:
NOTE:
• Instead of selecting Push Button Control, you can also start WPS-PBC by pressing and holding the
(WPS) button.
• WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed Mode PSK,
WPA-PSK-AES, WPA2-PSK-AES, WPA-PSK-TKIP, Open (No Security)
• This item is displayed when the Ethernet cable is disconnected and Wi-Fi is set to On.
• Reset Wireless (DocuPrint CM215 fw Only)
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all
wireless network settings are reset to their factory default values.
Values:
NOTE:
• This item is displayed when the Ethernet cable is disconnected and Wi-Fi is set to On.
Push Button
Control
PBC Start No* Disables the security method of WPS-PBC.
Yes Configures the wireless setting with the security method of
WPS-PBC.
PIN Code Start
Configuration
Configures the wireless setting using the PIN code assigned
automatically by the printer.
Print PIN Code Prints the PIN code. Confirm it when you enter the PIN code to
your computer.
No* Does not reset the wireless setting.
Yes Resets the wireless setting.
To Next Page
Loading...
Need help?
General
