Troubleshooting 401
031-579 Press the button to clear the message. Check if the working path setting to the FTP
server is correct.
031-582 Press the button to clear the message. Check if the FTP server encounters any
write-protection or disk problem.
031-584 Press the button to clear the message. Check the following:
• If the file name you specified is not used by other users.
• If file or folder that has the same name as the one you specified already exists.
• If the FTP server encounters any write-protection or disk problem.
031-585 Press the button to clear the message. Check if the FTP server encounters any
delete/write-protection or disk problem.
031-587
031-588 Press the button to clear the message. Check if the FTP server encounters any
write-protection or disk problem.
031-589 Press the button to clear the message. Check if the storage location has free space.
031-594 Press the button to clear the message. Contact your server administrator to check if
the scanned file has wrong setting while being stored to FTP server. If this does not
solve the problem, contact the Fuji Xerox local representative office or an authorised
dealer.
See also:
• "Online Services" on page 443
031-598 Press the button to clear the message. Check if the FTP server encounters any
write-protection or disk problem.
033-503 Press the button to clear the message. Check the report. Delete the unnecessary
data stored in the memory.
033-513
033-517 Press the button to clear the message. Check if the password of the fax lock is
correct.
033-518 Press the button to clear the message. Check if your country is set correctly.
033-519 Fax service is locked. To continue, press the button and disable the fax lock.
See also:
• "Limiting Access to Printer Operations" on page 341
033-787 Press the button to clear the message. The job is cancelled.
033-788 Press the button to clear the message. Remove the received fax, or wait for a while
until sending a fax is completed.
034-700 Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
• Check if the phone line is connected properly.
• Check if the destination number is correct.
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
See also:
• "Connecting the Telephone Line" on page 236
034-701
034-702
Error Code What You Can Do
To Next Page
Loading...
Need help?
General
