Fuji Xerox DocuPrint CM215 series User Manual

402 Troubleshooting
034-703 Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
• Check if the phone line is connected properly.
• Check if the destination number is available and correct.
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
See also:
• "Connecting the Telephone Line" on page 236
034-704
034-705
034-706
034-707 Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
• Lower Modem Speed.
034-708 Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
• Lower Modem Speed.
• Check if the destination number is available.
034-709 Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
034-710
034-711 Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
• Lower Modem Speed.
034-712
034-713
034-714 Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
• Check if the destination number is available.
034-715 Press the button to clear the message. If the error continues to appear after the
redial for the specified number of times, try the following:
• Set Number of Redial to the largest value.
• Set Interval Timer or Redial Delay longer.
• Lower Modem Speed
.
034
-716 Press the button to clear the message. If the error continues to appear after the retry
for the specified number of times, it will be cancelled. When retrying sending the fax,
lower Modem Speed.
034-717 Press the button to clear the message. If the error continues to appear after the retry
for the specified number of times, it will be cancelled. Retry sending the fax.
034-718 Press the button to clear the message. If the error continues to appear after the retry
for the specified number of times, it will be cancelled. When retrying sending the fax,
lower Modem Speed.
034-719
Error Code What You Can Do

Fuji Xerox DocuPrint CM215 series Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM215 series
Category	Printer
Language	English